mobile:0086-371-67666667

0086-371-67666667

Location: HOME > Products > Drying Equipment > Sludge drying machine

Sludge drying machine

Sludge drying machine

Applied MaterialFeeding Size

Device ConfigurationProcessing Capacity0.5-50t/h

Applied Material:sludge,clay and other metal and non-metallic materials in building materials, metallurgy, chemical industry and cement industry

24-hour consultation hotline:0086-371-67666667

Get a quote

Introduction

Sludge drying machine is widely used in coal mine, cement, mine, building materials, chemical industry, grain, compound fertilizer production and other industries. In order to control the temperature of the dryer, thermocouple is installed on the inlet and outlet device. The temperature change of the inlet and outlet end of the dryer can be displayed through the thermometer, which provides a basis for better control of the working temperature in the cylinder (generally 350-380 degrees).

Working principle

The heat source of the sludge drying comes from the combustion device. The sludge drying adopts the forward flow heating mode. Therefore, the river sand materials that need to be dried slip into the cylinder body from the feed box and the feed material, which is pushed back by the screw plate. Due to the tilt of the dryer, on the one hand, the river sand flows to the back end under the action of gravity and rotation, on the other hand, the river sand is repeatedly picked up by the plate, carried to the upper end, and then continuously spread down, so that the river sand materials form a uniform curtain in the cylinder, and fully exchange heat with the hot air flow in the cylinder. Due to the repeated spreading of river sand materials, the water contained in the sand is gradually dried, so as to achieve drying.

Performance advantage

1. In terms of structure: the sludge drying adopts advanced production technology, and the structure is compact and reasonable. Its floor space is only 1/3 of other dryers, which can save the civil construction investment cost of the river sand plant;

2. In terms of material: the cylinder and the discharge part are made of high-quality steel plate materials, which have good wear resistance, high temperature resistance, corrosion resistance, etc., which can extend their service life;

3. Feeding advantages: through special design, it can feed the river sand material uniformly and continuously, avoiding the blockage of the feeding end caused by the river sand too fast, and also preventing the idling phenomenon caused by the slow feeding;

4. Thermal efficiency advantage: The equipment has good heat preservation function and full use of heat energy. Compared with traditional dryers, it can increase its thermal efficiency by more than 50%, greatly saving equipment energy consumption;

5. In terms of effect: the quality of the river sand dried by this equipment is strong, the dry humidity is moderate, and the impurities are less. It has a good use effect and is unanimously recognized by the construction industry;

6. Environmental protection: The sealed drying structure is adopted, and the discharge port is designed with a dustproof device, which can completely avoid dust leakage during the drying or discharge process, and fundamentally solve the problem of dust pollution.


Related ProductsRelated Products

Case show