Whatiftheplasticshredderisblocked?

Plastic shredder is specially designed to tear up plastics, building templates, wooden pallets and other waste wood, long time to tear up the work, there may be some problems. For example, in the process of production, fast feed, plastic shredder suddenly appeared blocked, what to do?

Plastic shredder

Plastic shredder, congestion is more common problems are basically caused by not timely maintenance, regular cleaning, accumulate over a long period, small lesions in a serious illness, can jam during production, not only affect the production, can also harm the plastic shredder. This is the reason why the plastic shredder is blocked.

Plastic shredder failure requires you to pay attention to in time, if it is found that the shredding machine production, and the same raw material, check the damper is in place and pipes with and without air leakage, etc., the shredding machine jams are common faults, the possibility is there are four: 1: may be the body design problem; Two: the raw material is put in too fast; 3: it is the pipe of the discharge is not smooth; 4: possible raw material moisture content is too high, it is important to pay special attention to the bearing at work, its temperature is too high, or has the problem such as noise, are generally lubricating oil or the matching of the bearing cover and shaft tight, just can have this kind of situation.

Plastic shredder as long as pay attention to the maintenance of at ordinary times, the emergence of failure, or less, except the shredding machine quality closes nevertheless, of course, it is important to note that maintenance should not be too, such as lubricants add too much at once, cleaning too hard-working, but its use have hurt!