The speed of the dual shaft shredder is mainly regulated by the gearbox, which is the key component of the equipment. The gearbox of the dual shaft shredder must be installed and debugged by the technicians of the manufacturer. How to debug the gearbox after the machine is bought back? You need to pay attention to the problems of the gearbox. Here is a brief explanation:
1. Before the device, carefully check whether the motor and gearbox reducer are in good condition, and strictly check whether the dimensions of all parts connected with the motor and reducer match, and check the dimensions and matching tolerance of the positioning boss, input shaft and reducer groove of the motor.
2. Screw out the bolts on the dust-proof holes on the outer side of the reducer flange, adjust the system clamping ring to align the side holes with the dust-proof holes, and screw in the inner hexagon. After that, remove the motor shaft key.
3. Connect the motor and reducer naturally. When connecting, make sure that the concentricity of the output shaft of the reducer and the input shaft of the motor are the same, and the outer flanges of the two are parallel. If the centrality is inconsistent, the motor shaft will be broken or the reducer gear will be worn. Because the dual shaft shredder works in high temperature for a long time, we must pay attention to the working condition of each main part when using. If there is any problem, please stop the machine in time.
As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's double shaft shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667
Related Products
Email
Telephone
Leave Message
