Safeoperationofthealuminumcansshredder

How to safely use the aluminum cans shredder, there are five details that need our attention:

1. Installation of aluminum cans shredder

The aluminum cans shredder should be fixed to the cement base. If the workplace is changed frequently, the aluminum cans shredder and motor should be mounted on a base made of angle iron to prevent the aluminum cans shredder from being damaged by moving back and forth.

 

2. Must press the equipment of the tire tearing machine

Before starting, it is necessary to check whether the local connecting bolt of the unit is tightened, whether the tension of the belt is appropriate, and whether the power cord is good. Whether the motor shaft is parallel to the aluminum cans shredder shaft. Check the blade to see if the screen is in good condition.

 

3. Precautions after starting small tire tearing equipment

After starting, first idle the device for 2-3 minutes to check if the rotor is turning correctly and the sound is normal. It only works when the speed is stable at the rated speed.

 

4.The safety operation requirements of the tire tearing machine in use

In the work, always pay attention to the condition of the aluminum cans shredder, the feed should be averaged to prevent blockage, and work without overload for a long time. If there is vibration, noise, excessive temperature and outward spray between the bearing and the body, stop the inspection immediately and repeat the work. Damaged materials should be inspected carefully. Do not mix foreign objects such as stones or tires to avoid damage to the machine. When the machine is running, the operator must not disassemble or disassemble the machine to check the working condition in the tear chamber. When a blockage occurs, the operator is prohibited from placing his hand in the stuffing hopper. When loading, stand on the side of the aluminum cans shredder to prevent the rebounding debris from hurting the face. Do not close immediately after the work is finished, idle for 2-3 minutes, so that the materials in the machine are completely discharged.

 

5.Inspection and maintenance of the aluminum cans shredder after shutdown

After the aluminum cans shredder is closed, the main vulnerable blades should be inspected in time. After wear, the entire set of blades should be replaced at the same time, either in the same direction or in the same direction. When replacing a new blade, replace the entire blade at the same time instead of replacing the old blade with a single blade. Screens are also wearing parts, such as partial damage enough to rive, severe damage requires the replacement of a new screen. After 300 hours of operation, the aluminum cans shredder should clean the bearings and replace the oil.

 

As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's double shaft shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.

 

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667