In order to achieve better shredding effect and working ability of the aluminum shredder equipment, Shuguang heavy industry will explain to you the precautions before, during and after use of the shredder equipment:
Precautions before use:
1. Check the tightness of the screws in each part;
2. Turn the pulley by hand to see if the material is torn in the tearing chamber;
3. Whether the lubricating oil at each bearing position is full.
Precautions in use:
1. It is forbidden to put inflammable and explosive materials;
2. It is strictly forbidden to stand before the feeding port;
3. The staff must be equipped with a helmet when the equipment is in operation;
4. If there is overload, it should be slowed down. The feeding speed prevents overloading and brings safety hazards to the motor.
Precautions after shutdown:
Allow the equipment to idle for two minutes before the equipment is shut down, so that the torn material in the tearing chamber is completely eliminated to prevent problems during the second startup. Check the motor temperature and bearing temperature before leaving work. Check the tightness of the belt. Check and replace the hammer and blade as necessary.
When using the aluminum shredder, pay more attention to the inspection and maintenance of the equipment. It is necessary to solve the problem and solve the problem so that the shredder equipment can achieve better shredding effect and work performance.
Aluminum shredder equipment produced by shuguang heavy industry adopts intelligent operation, which not only saves manpower, improves work efficiency, but also reduces manual labor.
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
Related Products
Email
Telephone
Leave Message
