Howdoyousolvethesuddenshakingoftheshredder?

In the process of producing plastic shredder, what problems should be overhauled during the shaking of the machine? The installation question is still other, which parts should be inspected? There are several possibilities for the vibration of the plastic shredder: 1.

In the process of producing plastic shredder, what problems should be overhauled during the shaking of the machine? The installation question is still other, which parts should be inspected?

Plastic pieces machine fibrillation has several possible: 1 bearing not processed, the two bearing seat is no longer the same horizontal plane, it also briefly cause bearing heating, bearing jammed, the machine can't normal operation.

1. The hammer blade may be of inconsistent quality, and the weight of the hammer on the same shaft is almost the same and the quality of the hammer on the relative axis is the same.

2. The ground level is not handled well, and the force is not uniform, which makes the machine vibrate.

3. The equipment is not proper (about 16%). 1.

4. The equipment is not in place, the equipment is faulty or not installed in the bearing position, which makes the bearing clearance too small. Or the inner and outer rings are not in the same rotation base, forming different hearts. Suggestion: select the appropriate or professional bearing equipment, the equipment should be checked by special instrument.

5. One of the primary reasons for the premature failure of the bearing of the plastic shredder when the lubrication is poor (about 50%), including the failure to add lubricant or lubricating oil in time; Or not put in place, improper selection, improper lubrication method and so on. Suggestion: use accurate lubricant or lubricating oil, and accurate refueling method.

Fatigue (about 34 percent) fatigue damage is the most common damage to bearings. Reason: long time overload operation; Not maintained in time; Patching is not proper; Equipment aging, etc.