In order to increase the driving power of the tire shredder, most of the current tire shredder equipment adopts a dual-shaft power design, so that the material will not be jammed due to insufficient power during the shredding process. The power of the tyre shredder is sufficient, but depending on the material, there may be thicker materials that will cause the overlapping materials to jam.If the machine is stuck and the machine is not shut down in time, it can cause damage to the equipment.
In order to deal with the damage caused by the material jam to the tire shredder, the tire shredder is equipped with an automatic protection function. This function can protect the equipment from reversing the ejection operation when the machine is stuck, and the material from the stuck machine passes through the rotating shaft. The reversal form allows the materials to be reordered and shredded again, which effectively protects the motor from damage caused by the card machine for a long time. How is this operation achieved?
In fact, this setting is relatively simple. It is usually set in the control cabinet of the tire shredder. A control unit that can make the motor forward and reverse is installed in the control cabinet. The normal working condition is forward transmission.If there is a jam during work, the motor is still working, and the current of the motor will increase at this time, so the current change of the motor can be controlled.
The current during normal operation is constant, so the current value during normal operation can be locked by the current controller. If the current value is higher than the locked current value during the work, it is because the card machine causes the current of the motor to pass. If it is high, this is the current controller will give the motor a reverse signal, so that the motor will run in reverse, which is used to relieve the stuck machine, which effectively protects the normal operation of the tire shredder equipment.
As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's waste shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: 0086-371-67666667、67666660
Mobile phone: 0086-13523465141