How to use the metal shredder safely, there are 5 details that need our attention:
The metal shredder should be fixed on the cement base. If the workplace is frequently changed, the shredder and motor should be installed on a base made of angle iron to prevent the metal shredder from being damaged by moving back and forth.
2. The equipment of the metal shredder machine must be turned on and checked
Before starting, you must check whether the local connecting bolts of the unit are tightened, whether the transmission belt is tight, and whether the power cord is in good condition. Whether the motor shaft is parallel to the shredder shaft. Check the blade to see if the sieve is in good condition.
3. Precautions after starting the small metal shredder equipment
After starting, first let the equipment run idling for 2-3 minutes to check whether the rotor rotation is correct and the sound is normal. It can only work when the speed is stable at the rated speed.
4. The safe operation requirements in use
In the work, you should always pay attention to the condition of the shredder, and the feed should be even to prevent clogging and not overload work for a long time. If there is vibration, noise, high temperature, or spraying materials between the bearing and the body, stop the inspection immediately, troubleshoot the fault and continue working. Damaged materials should be checked carefully, and foreign objects such as stones and metals should not be mixed to avoid damage to the machine. When the machine is running, the operator shall not disassemble or disassemble the machine to check the working status of the tearing room. When blockage occurs, it is strictly forbidden for the operator to put his hands in the stuffing bucket. When feeding, you should stand on the side of the shredder to prevent rebounding fragments from hurting your face. Don't close it immediately after the work is over, run it for 2-3 minutes, so that the material in the machine is completely discharged.
5. Inspection and maintenance of the metal shredder after shutdown
After the metal shredder is closed, check the main vulnerable blades in time. After wear, the entire set of blades should be replaced at the same time, whether in the same direction or in the same direction. When replacing a new blade, the entire blade should be replaced at the same time instead of replacing the old blade with a single blade. The screen is also a vulnerable part. If the local damage is enough to be riveted, the screen needs to be replaced with a new one if it is seriously damaged. After 300 hours of operation, the metal shredder should clean the bearings and change the oil.
As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's waste shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: 0086-371-67666667、67666660
Mobile phone: 0086-13523465141