Although it is still a long way from the hot days, we have to mention the problem of knowing the heat of the drink bottles shredder, and prepare for the cooling work of the shredder during the hot summer.
Impeller feeders and belt feeders are installed inside the metal shredder, but the two feeders do not have a heat sink for suction. If you want to suck the air, you must open the adjustment plate to shred the metal. When the machine is properly sucked, the drink bottles shredder will form a negative pressure state for the internal shredding and shearing work when sucking the air. By this negative pressure, the material of the shredder in the shredder can be discharged in time. However, if the adjustment plate is opened and the exhaust air is small, the air volume of the shredder will be small. According to the material properties of the metal shredder itself, coupled with the hot weather, the internal air volume of the shredder is small, which will cause the internal heat of the shredder, which greatly reduces the shredder effect of the drink bottles shredder shredded effect. So in the operation of the shredder, always look at the amount of opening air in the adjustment plate
Due to the long-term work of the drink bottles shredder, the hammer inside is constantly absorbing dust due to the constant friction of the metal material, which makes the bag of the vacuum cleaner become sticky, which will result in the loss of the air volume of the shredder dust collector. It will cause the heat of the shredder to reduce the output of the shredder. If you want to completely prevent similar incidents, you should dispose or replace the duster bag of the shredder in time, so that the shredder can be heated. It is solved.
Through these methods, we can cool down the metal shredder in the summer.
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
Related Products
Email
Telephone
Leave Message
