Themaintenanceofdrinkbottlesshredder

The drink bottles shredder is a high-intensity device. The necessary maintenance can extend the life of the machine and save energy and maintenance costs for the customer. The maintenance of the drink bottles shredder generally has the following parts: screws, blades, hydraulic stations, reducers, spindles, electrical appliances, etc. Let me talk about it separately.

Shredder screw: Loose screw. Pay special attention to this issue. General equipment is installed at the factory and used at the customer's site after transportation. Customers have a higher chance of loosening screws when they use the device for about a week. Generally, it will be better after a period of time. There is a strange sound in the machine running, and it is possible that the screw is loose. It is recommended to check whether the screws in the main running part are loose before or after stopping the shredder every day.

Blade: The gap between the fixed knife and the moving knife is usually between 50 filament and 100 filament. Loose screws on the fixed blade can easily damage the blade, so remember to check the screws of the fixed blade frequently. The life of the blade is generally one corner that can shred 300 tons of material. When the knife is not fast, just loosen the screw of the fixed knife, and rotate the knife one surface to tighten it. It can be used again. The movable knife has four faces. In other words, you can change the face four times. Mainly based on the material of the material. A pair of knives generally shred 1200 tons - about 1500 tons will become dull. After becoming dull, it is recommended to change the blade immediately. Since the blade is blunt, the output will be reduced, and the spindle bearings, reducer, and motor will be affected or damaged.

E-mail : shuguangzhongji@163.com

Cel : 0086-13523465141