Suggestionsfromtireshreddermanufacture

The tire shredder is mainly used for grinding tires, wire tires, wire tires (radial tires) and various waste rubber products or trims to make it into a rubber powder and achieve the required fineness (mesh). At present, the tire shredder equipment, whether it is waste rubber or used tires, can be subjected to normal shredding treatment, and has become a special shredding device for used tires. As a tire shredder manufacturer, we recommend that you pay attention to the following points in the process of use:
 
First of all, be sure to follow the operating procedures in strict accordance with the operation. During the process of starting the tire shredder, the tool, electric control, and body shall not be manually cleaned, parts or parts may be replaced or the machine shall be lubricated and maintained;
 
Secondly, during the operation, it is forbidden to extend any part of the human body into the body of the tire shredder to prevent the moving parts from being caught or crushed; there must be no oil or corrosive chemicals.
 
Finally, the tire shredder is turned on again after a period of suspension, and a thorough inspection of the machine is required to ensure that the components of the tire shredder are intact and that there are no foreign objects that may affect the operation. The adjustment of the drive unit and the adjustment of various safety protection devices shall be performed by a full-time staff.