As we all know, the tire shredder is also called the tyre shredder, is a kind of eco green equipment, mainly through grinding tires, wire tires, wire tires (radial tires) and a variety of waste rubber products or scrap, make it into rubber powder, and to achieve the required fineness (mesh), so that it becomes the raw material of the product. So, in the process of use, how to maintain to increase its life cycle?
We know that half of the mechanical equipment to regular maintenance to better operation, the same is true of our tire shredder machine, good maintenance of the equipment will increase the operating cycle, the following is the daily maintenance of the tire shredder a few points:
1. Carefully check whether the screws of each part are loose before starting the machine, and tighten them in time.
2. After starting up, empty load can be operated for one minute before putting into production.
3. The bearing of the crusher should be regularly filled with butter, usually once a week.
4. The blade grinding 1-2 tons should be replaced, and the removed blade should be sharpened on the knife grinder for convenient replacement next time.
5. Check the transmission belt frequently and adjust it in time if it becomes loose.
6. When changing the blade, remember to adjust the blade clearance, which directly affects the output.
7. Check the anchor screws of the fixed tire crusher frequently to ensure the stable operation of the equipment.
Only to do these daily work, is conducive to tire grinder play a greater economic benefits.
Tel : 0086-371-67666667
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141
Related Products
Email
Telephone
Leave Message
