Problemsneedingattentioninassemblyofwoodshredder

Wood shredder assembly is a complex process, which includes the assembly of parts according to the requirements of assembly drawings, assembly into a whole machine process, but also should include the assembly process adjustment and assembly after the commissioning process, the following is the construction of wood shredder and maintenance and assembly process may encounter problems Question.

 

Before assembling and tearing machine equipment, it is necessary to clean the rust, grease and dust on the mechanical parts. When cleaning, brush can be used in diesel oil, kerosene or gasoline, or clean with clean cloth. It should be noted that plastic parts can not be cleaned with organic solvent. In the cleaning process, to prevent the surface of the parts of the shredder scratched, bearing box oil hole must be dredged, and then use clean gauze or cotton silk plug in the hole to prevent dirt into. For example, the center of gravity of pulleys, gears, tear blades, etc. must coincide with the center of rotation, otherwise, wood shredder in operation, due to the deviation of the center of gravity will affect the use of mechanical equipment. After the shredder is finished, check the wrench and other tools are left in the shredding chamber. After the power supply is switched on, start for 3 to 4 seconds, no abnormal sound or vibration after normal operation.