Howtosolvethenoiseproblemofbiaxialshredderequipment?

In order to make people feel more comfortable using the biaxial shredder, we will talk about how to solve the noise problem of the biaxial shredder equipment.

First of all, from the operation point of view, the operation precautions of the biaxial shredder: after starting, when the equipment reaches normal operation, it is allowed to feed the materials uniformly and continuously. Pay attention to the speed, sound and bearing temperature of the motor and thresher. The operator should stand on the side of the feeding port, tighten the sleeves of the clothes, and wear a mask and work cap. When feeding, pay attention to whether there are hard objects such as stone, sickle, tool screw and so on, so as not to damage equipment and cause personal accident.

No belt, oil filling, cleaning and troubleshooting are allowed in the operation of the two-axis shredder. The other is to check, first of all, whether the rotor bearing box bolts can be loose, and then check whether the weight of each set of hammer head can be pided symmetrically. For the spindle head scanning and boring, the corresponding spindle head should be ground low to sweep and boring parts, and the rotation speed is not enough. First, check whether the voltage is too low, and then check whether the line number is too small.

1. When installing the double-axis shredder blade, the nut must be properly tightened. The over-loose saw blade will slip when rotating cutting.

2. Regularly check the radial run-out of the main shaft of the machine, and ensure the mutual anastomosis between the blade incisions of the biaxial shredder with the swing.

3. Before cutting, the operator must carry the protective equipment and check whether the saw blade is in good condition.

4. The blade of the biaxial shredder should be idled for 30 seconds after the installation is smooth, and the cutting work shall be started after all the normal conditions are determined.

5. The alloy head of the biaxial shredder has sharp and sensitive cutting edges, so care must be taken to protect the alloy head from damage during blade movement, installation and disassembly.

6. Before installing the blade of the biaxial shredder, the sundries on the spindle and flange plate must be removed. Flange plate surface should be flat, clean and shaft intersect each other vertically.