Effectofmaterialoncrushingequipmentefficiency

There are many types of crushers, for example, rubber shredder,wood shredder,metal shredder,tire shredder,etc. Different types of crushers have different uses, but their basic principles of crushing materials are the same. However, in the crushing process, it can be clearly seen that the efficiency of some crushing equipment is relatively faster, the reason is not the new and old of the crushing equipment, but the effect of the broken materials, so the efficiency of the crushing equipment is not necessarily the problem of the crusher itself, and has a close relationship with the nature of the broken material. The impact is as follows:
1,Hardness of materials. The harder the material is, the more difficult it is to break it up and the more severe the wear and tear on the equipment. The crushing speed is slow, of course, the crushing capacity is small, the efficiency will be reduced accordingly.
2, the humidity of the material, that is, the moisture content in the material is large, the material is easy to adhere in the crusher, but also easy to block in the process of feeding, resulting in reduced crushing capacity; And drier material, the impact will be small.
3, after the crushing of the fineness of the material, fineness requirements are high, that is, the requirements of the crushing of the finer the material, the smaller the crushing capacity.
4, Composition of materials: the more fine powder contained in the materials before crushing, the more it will affect the crushing, because these fine powder are easy to adhere to affect the conveying. For the fine powder content should be more than a screen in advance.
5,Viscosity of materials. That is, the greater the viscosity of the material, the easier the adhesion, and the material attached to the crushing equipment, it will affect the progress of the equipment.
6,The better the abrasion resistance of the crushing parts (hammer head, jaw plate), the greater the crushing capacity. If not, the crushing capacity will be affected.
The crusher will have a certain impact on the machinery itself when it is broken, so the machinery needs regular maintenance, inspection and repair, which will reduce the impact of the equipment and increase the service life of the equipment.